Iron Alloying Tablets
Used by Primary Aluminium producers to add Iron to molten aluminium, Iron Alloying Tablets (Mastab) consist of a homogenous mixture of Iron Powder, Binder Fluxes, and Aluminium Powder etc.
Different Grade Specifications
Atomised Iron Powder for structural parts offering consistent dimensional change properties after sintering.
Contact us for Technical data sheet
AD – 2.95 gm/cc
GD – 7.10 gm/cc
100 Mesh Powder
High compressibility atomised iron powder suitable for higher density parts.
Contact us for Technical data sheet
AD – 2.95 gm/cc
GD – 7.16 gm/cc
100 Mesh Powder
Low density Atomised Iron Powder for low density parts like shock absorber pistons.
AD – 2.65 gm/cc
GD – 7.08 gm/cc
GS – 30 MPa*
*600 MPa die-wall
Low density Atomised Iron Powder offering high green strength to the parts with thin edges or lugs.
AD – 2.95 gm/cc
GD – 7.10 gm/cc
GS – 44 MPa *
*600 MPa die-wall
Low oxygen Atomised Iron powder for Welding Applications
AD – 3.00 gm/cc
Fe – 99% min
Oxygen: 0.20% max
Low density Atomised Iron Powder with high surface area and high green strength ideal for clutch and brake pads.
AD – 2.45gm/cc
GD – 7.0 gm/cc
100 Mesh Powder
Atomised Iron Powder used for adding iron into molten aluminium for foil applications.
AD - 3.00 gm/cc
Fe – 99% min
40 mesh powder
High density Iron Powder used in metallurgical Cored Wire along with other additives like calcium etc.
